The DOW FILMTEC SW30-2540 reverse osmosis membrane has one of the highest flow rates available to meet the water demands of sea-based and land-based watermakers. The FilmTec Reverse Osmosis Membrane can also be operated at lower pressure to reduce pump size, operating expenses, and overall cost. These reverse osmosis membranes are commonly used in on-board watermakers to create drinking water from brackish or ocean water for boats, yachts and cruise ships.
Download data sheet for more specifications:
FilmTec_SW30_product_datasheet_pdf.
SPECIFICATIONS FOR SW30-2540
|
OPERATING LIMITS FOR SW30-2540
| Maximum Operating Temperature: | 113°F (45°C) |
| Maximum Operating Pressure: | 1,000 psig (69 bar) |
| Maximum Pressure Drop: | 15 psig (1 bar) |
| Maximum Feed Flow Rate: | 6 gpm (1.4m³/h) |
| pH Range, Continuous Operation*: | 2-11 |
| pH Range, Short-Term Cleaning**: | 1-13 |
| Maximum Feed Silt Density Index: | SDI 5 |
| Fere Clorine Tolerance***: | <0.1ppm |
*Maximum temperature for continuous operation above pH 10 is 95°F
**Refer to cleaning guidelines.
***Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure.
Please visit our Frequently Asked Questions Page (FAQ) if you have any questions, or feel free to contact us.
